• OUR QUALITY OF ALUMINIUM:

Aluminum tubes are made of a special alloy AlMgSi with high elasticity and strength. Durability and aesthetics of the pipe is obtained through the process of anodizing with a minimum thickness of Al / An 20 .mu.m. Od1,2 pipe wall thickness - 3.5 mm.

Mast in terms of strength meets the requirements of PN-EN 40 and EN 1991-1-4: 2008

• THREE TIMES lighter than steel:

This results in the possibility of saving the installation of lighting columns relating to, among others, from:

1.       without the necessity to use heavy machinery,

2.       cheaper and easier transport.

3.       faster installation of an aluminum pole.

• 100% RECYCLING:

Aluminium is characterized by the possibility of easy disposal and recover part of the costs of purchase. The raw material for the production of aluminum masts is largely recycled aluminum.

• DURABILITY:

Flagpoles are exposed to adverse weather conditions. The use of aluminum as the primary material for the construction of the mast allows you to minimize this impact.

Aluminium has to forming a protective coating on its external structure, does not require a protective coating (painting, zinc coating) as in the case of steel poles.

• FORMS OF FINISH:

The availability of different forms of surface finishing of aluminum:

1.       The standard aluminum masts are natural-anodised silver

2.       Masts can also be painted in any RAL color.

The major advantages of composites include:

• ·         PRODUCTION - LOW EMISSIONS CO₂

The impact of CO2 in the production and operation of a composite mast: Production of composite masts is environmentally friendly, because CO2 emissions are very low and the masts of fiberglass undergo 100% processing. The composite is the preferred material because of its parameters, properties, recyclability and CO2 emissions to the atmosphere. Composites greater than its friendliness to the environment relative to other materials in the "life" because of the long lifetime, no need for maintenance during operation, lower energy consumption in their processing, convenient and low energy consuming recycling process. Production and the production of composites often consumes less energy than the production of metals because composites weigh less, the amount of energy consumed during transport is also smaller. The energy needed to produce the composite mast is about 1/200 of the energy used to produce an aluminum mast. After a lifetime of material in 100% processed by our company and used for other products.

• COLOR:

The standard mast is made in white (without subsidies), but you can give it any color, in colors similar to RAL. It is possible to manufacture multi-colored masts.

• AESTHETICS:

The use of high quality materials makes the mast is resistant to UV rays. The smooth surface facilitates soil removal, self-adhesive stickers, residues adhesives, chewing gum.

• DURABILITY:

Polyester resin composite does not corrode. The high vibration damping and flexibility to the operation of the mast in extreme wind conditions.

The mast is resistant to:

•  
• road salt and other measures used to snow removal and street cleaning,
• pollution resulting from traffic,
• contamination from animals
• mechanical damage
• UV

The material does not constitute any scrap value. This eliminates a large extent the possibility of theft and significantly reduce the amount of devastation, dismantling and related repairs.

• SECURITY:

Polyester resin composite is an insulating material, does not require grounding. The mast is low absorbing impact energy, eg. A man, the vehicle which means minimal damage to the vehicle and reduce the risk of injury.