EWE water meter set for installation in vertical 3129536
Drawings
Characteristic
Components:
1. The valve poppet oblique, made of brass Ms 58
• stem from not reaching up,
• the body does not require maintenance,
• double stem seal technology o-ring,
• knob of PE,
• input with internal thread, including fitting System sealing O-ring,
• output that matches completed nut thread count, with a hole for the sealing of flange centering to permanently seal placed at the counter,
• the locking ring to the hanger assembly,
• the seal,
• without the possibility of dehydration.
2. Mounting plate kit made of steel
• minimum thickness of 3 mm,
• open, staggered supporting arms with a thickness of 4 mm,
• hot-dip galvanized
• an additional powder coating of epoxy resins (EPS)
• the cap nuts,
• t-slot,
• built-meter length tailored to counter domestic and foreign.
3. Valve type "CRS" - combined valve poppet oblique with integrated non-return valve performing the function of the valve antyskażeniowego PN-EN 1717: 2003, made of brass Ms 58
• stem from not reaching up,
• the body does not require maintenance,
• double stem seal technology o-ring,
• the inner stainless steel spring.
• knob of PE,
• screw control (valve EA PN-EN 1717: 2003)
• with integrated, facing down the drain valve,
• entrance with a form-fitting, multistart compensator length, double Packing- O-ring, hydraulically optimized,
• nut matching the thread count, and having an additional function adjustment compensator, with a hole for the sealing of flange centering to permanently seal placed at the counter,
• the locking ring to the hanger assembly,
• the seal,
• output with internal thread, including fitting System sealing O-ring.
EWE water meter sets are pre-assembled in groups of input and output and delivered as a whole cartons.
Contact
Contact persons
karsten.walter@ewe-armaturen.de