Components:

1. Ball shut-off valve, made of brass Ms 58
• bezdławikowy guaranteeing full, smooth flow,
• cut off some water guaranteed 90 ° rotation of the handle of the wing also made of Ms 58,
• solid manufacture with a minimum wall thickness of 3 mm.
• ball valve made of brass, mikropolerowana, chrome-plated, with two holes to continuously flow over the ball, seal with PTFE,
• input with internal thread, including fitting System sealing O-ring,
• output that matches completed nut thread count, with a hole for the sealing of flange centering to permanently seal placed at the counter,
• the locking ring to the hanger assembly,
• the seal,
• without the possibility of dehydration.
2. Mounting plate made of steel
• minimum thickness of 3 mm,
• open, staggered supporting arms with a thickness of 4 mm,
• hot-dip galvanized
• additional powder coating (epoxy resin)
• the cap nuts,
• t-slot,
• built-meter length tailored to counter domestic and foreign
• adjustability of the arms, eg .: for water meters Qn 2.5 95 - 145 mm
• tab turned up outside
• nut
3. Flare made of brass Ms 58
• at the entrance of the nut thread matching the meter.
• with a male thread at the output,
• with integrated threaded compensator length (with two seals O-ring)

EWE water meter sets are pre-assembled in groups of input and output and delivered as a whole cartons.