DESCRIPTION OF THE CONSTRUCTION OF SOLAR COLLECTOR PE 200S

Solar PE 200S is a heat exchanger cieplnąpochodzącą transferring energy from solar radiation into the working medium circulation solarnego.Obudowa collector is made of aluminum sheet thickness. 1mm uformowanejw chest. The sides of the box are joined together permanently special solder. Aluminium trailer is painted with powder paint on brown (RAL 8015) or by the contract are not painted. The bottom and sides of the box are lined with mineral wool insulation thickness of 50 mm which, placed aluminum foil thickness. 0,09mm. Above the insulation layer is absorber. The absorber is made of strips of sheet copper, which for better thermal conductivity kneaded and are soldered copper pipes. Yes they have done so. fins are connected after 7 pc. I soldered to the collecting tubes ended spigot threaded externally, serving as input / output medium. Yes absorber made a whole is plated and then unilaterally indoor black chrome-plated. Output collecting tubes of the absorber are sealed in relation to the box rubber gaskets wytrzymującymi large fluctuations in temperature. On the so prepared collector is glued tempered solar glass thickness. 4mm 1000 x 2000, and then aluminum decorative frame. In the corners of the collector has 4 internally threaded holes M10 technology for easy installation to the factory building hardware or other construction wsporczej.Wykorzystane to produce the collector PE 200S materials such as aluminum, copper, tempered solar glass, the application of galvanic coatings nickel and black chrome on the surface of the absorber They provide its length of use expected for min. 20-30 years. The highest quality product confirmed by tests carried out by the Institute of Fundamental Technological Research Polish Academy of Sciences guarantees the users of solar PE 200S high yields energy and ensure its comfort. Lightweight and safe design of the collector PE 200S facilitates both installation of roof, the roof as indywidualnychkonstrukcjach support.