The design of the windows made of thermally insulated profiles (RMG 1.0).

Depth profiles of 72/77 mm.

A variant of the so-called windows. "Hidden wing"

Depth profiles: Frame 72 mm, a wing 77 mm (83 mm)

The dimensions of the profiles in the view.
Frame: 87.5 - 103 mm

Wing: 55 - 60 mm

Mullions: 68.5 - 256 mm

Zone insulator.
Factory fitted polyamide strips, reinforced with glass fiber; space inside the insulator filled with polyurethane foam.

Glazing and gaskets.
Gaskets for sealing the rear window in wręgach of windows and doors and rebate gaskets to seal the perimeter of the contact side of the frame are made of synthetic rubber EPDM. Central gasket is the seal of the multi-chamber vulcanized corners. Alternatively, you can use the frame retreated. Outer seal must be installed only in the form of a frame vulcanized

Thick fillings.
Wing (max.): 34 mm
Rama (max.): 45 mm
Tests.
Water resistance: Class 9A according to EN 12208
Air permeability: Class 4 in accordance with EN 12207
Acoustic insulation Rw, R to 41 dB, depending on the type of glass
Thermal insulation: UR, BW, in accordance with EN ISO 10077-2, depending on the geometry of the profile between 1.4 W / m2K and 2.2 W / m2K.

Surface treatment.
Anodic oxide coatings, surface preparation according to DIN 17611
Polyester powder coating, surface preparation according to EN ISO 3892

The quality management system: according to EN ISO 9001.