Pumping tank is a complete facility equipped with internal instalecje and hydraulic valves and automatic control system for the electric pump operation. Pumping is delivered directly to the construction site as a complete unit.

Pumping tank is characterized by:
- Compact design, overall dimensions tailored to each user's needs
- Ease of installation, limited to a minimum of construction work
- Airtight container eliminates the ingress of sewage into the ground (environmental)
- Minimizing maintenance and maintenance as a result of the use of submersible pumps automatically controlled
- The elimination of the construction of a dry chamber to install the pump

Application:
- Allows you to channel objects away from the collector sewer
- Eliminates performing deep excavations in order to align large plant
- Facilitates the exercise of the sewage system in hilly - installation of discharge
- Allows skanalizowannie sunken objects such as: tunnels, basements, warehouses, etc.
- Pumping of raw sewage by using pumps to freedom of movement or pumps with cutting rotor
- Pumping of sewage from locations with uneven inflow

Construction and operating principle:
Pumping is sealed, cylindrical vertical tank made of polyester resin reinforced with fiberglass or steel protected with special anti-corrosion coating inside and outside. The side powierzczni tank are mounted on special connectors inflow and outflow, whose location in each case tailored to the local conditions of installation at the customer. Recommended dimensions of the well diameter 800 - 2500 mm, height 2500 - 8000 mm, with a capacity of Q = 0.5 l to 150 l / s, H = 5 msł.w.do 40 msł.w

Submersible pumps installed in a pumping station, sewage suck directly at the bottom of the tank through the hole in the bottom of the pump body. When installing the discharge line tee creating branch (closed Zasów), we get the possibility of being moved sediment accumulated at the bottom of the tank and a flushing stream of pumped sewage. Pump operation is controlled and monitored by an automatic electrical system mounted cabinet is installed on top of the tank. The control signals come from the float switches. Inside the tank mounted jast platform and ladder for maintenance. The pumping station is equipped with a natural ventilation system (gravitational). The whole pumping station is mounted on a concrete slab made in the trench. Tank Pumping stations are used in modern newly built or modernized plumbing in cities, residential areas, clusters of cottages, in industrial plants. Especially wherever the execution gravity drainage is not possible

The control system pumping station
Standard control pumps installed in the hermetic (IP 66) cabinet made of injection-molded polyester reinforced with glass fiber.

The control system consists of poniżdzych components:
- Main switch - breaker of 30 mA
- Fuse control circuits - circuit breaker (B)
- Fuses pump motors - breakers series M 250
- Switch mode - manual, STOP, automatic
- Sensor sequence or phase loss
- System start-up slot - triangle (for motors above 5 kW)
- Protection while running the pumps
- System changes the order to start the pumps
- Work time counter pumps
- Lights
- Protection against "dry run" - float
- Pump control - swimmers
- 220V socket. Secured system P - 312
- Alarm lamp
- Heater with thermostat
- Place radiozłącze or telephone modem

Extras on request INVESTOR:
- Radiozłącze or modem
- Sound signaling
- 24 V socket
- Socket 380 V
- Voltmeter with switch siedmiopozycyjnym
- ammeters
- Socket for connecting a transportable generator
- Boot device "SOFTSTAR"
- Hydraulic control probe
- Control of ultrasonic flow sensor
- Elektromagmetyczne flow meters with the recorder.

Transport, commissioning, warranty
The company provides ABBUD the destination automatic tank pumping stations and carries out technological start.

We supplied by our company pumping give guarantees:
- Tank with polyester reinforced with glass włókmen - 15 years
- Fittings and pipes of stainless steel - 5 years
- Automatic - 2 years
- Pump - up to 18 months