Archispace
« Manufacturers « ELASTYCZNY KLINKIER Sp. z o.o. « Product catalog « Mineral plate clinker ELASTOLITH E.6010
Mineral plate clinker ELASTOLITH E.6010
Materials
Mineral plate clinker ELASTOLITH E.6010_FR
Mineral plate clinker ELASTOLITH E.6010_grout anthracite_FR
Mineral plate clinker ELASTOLITH E.6010_grout brown_FR
Mineral plate clinker ELASTOLITH E.6010_grout gray cement_FR
Mineral plate clinker ELASTOLITH E.6010_grout gray_FR
Mineral plate clinker ELASTOLITH E.6010_grout light gray_FR
Mineral plate clinker ELASTOLITH E.6010_grout white_FR
Descriptions
Mineral plate clinker ELASTOLITH
Technical data
Mineral plate ELASTOLITH clinker is produced from natural ingredients, including carefully selected quartz sand (approx. 92%) and the highest quality polymer resins (approx. 6%). Mass is subjected to a deep staining with pigments based on iron oxide and UV protection. Discoloration, nuances of color and surface structure of each plate are handmade.
Description of material
- Binder: polymer resin, approx. 6% of the content.
- Shades of color: natural pigments based on iron oxide.
- Filling: mix of specially selected quartz sand, approx. 92% of the content.
System Properties ELASTOLITH
- The system is fully frost-proof and vapor-permeable
- Absorption system on the level of about 3%.
- The weight of the entire system is approx. 7 kg / m²
- The plate is very flexible and can be applied to a curved surface and bent and adapted to the shape of the corner (line Classic)
- Tiles and adhesive are manufactured in the same factory, with the same components
- Tiles Elastolith gain hardness after the entry into reaction with a special glue Elastolith
- The thickness of the plates is approx. 3 mm to about 6 mm
- Shockproof
- No loss when cutting
- No need to impregnate
- Washable under a pressure of 30 bar
- UV resistant
- No need to grouting / jointing
- The system can be applied only to special adhesive Elastolith
- Has a Technical Approval ITB Certificate of Factory Production Control ITB Hygienic
Usage
- The possibility of use on any rigid and stable base
- Facades of buildings
- Insulation systems, on polystyrene and mineral wool
- interior walls
- Chimneys and fireplaces to 100 ° C surface temperature
temperature resistance
- After the installation, no negative impact temperatures ranging from -35 ° C to + 100 ° C
- Recommended assembly at an air temperature of + 5 ° C to + 25 ° C
- The system can not be installed at temperatures below 0 ° C
- Both during the installation and immediately after the installation of the system, for at least 5 days should be guaranteed a temperature above 3 ° C
Transport and Storage
Clinker Elastolith should be transported and stored in closed, dry rooms, without contact with water and excessive moisture. In any case, do not store the tiles on the outside.
Special adhesive Elastolith and ground Elastolith should be transported and stored in a positive temperature without contact with water and excessive moisture. Under no circumstances do not allow contact with glue and ground frost.