PVC entrance doors
Descriptions
http://www.aluplast.com.pl/drzwi-zewnetrzne-z-pvc
The doors are a showcase of the house anymore because of the entry emphasize its character. Rich colors profiles, virtually unlimited design possibilities and the possibility to select a variety of fillings, from classic to the ultra-modern.
In addition, the door is expected to provide a high degree of safety and protection against noise and weather conditions. The characteristic features of door systems aluplast is their sturdiness and elegance. Thanks to the multi-chamber construction, installation depth of 60 to 85 mm and the use of the threshold of the door of the interlayer-insulating have very good thermal insulation parameters. High stability of the wing through the use of arms with large cross sections and the use of weldable corner connectors ensure the appropriate parameters and static strength.
Low threshold door with a height of 20 mm meets the requirements for building devoid of architectural barriers and allows trouble-free entry and exit. Specially shaped foot threshold allow you to connect the system with additional profiles, such as. Enlargement. Wide aluminum drip drain water rafting on the outside.
Showcase your home.
The five-a depth of 70 mm with the possibility of using fillings to 41 mm width.
IDEAL 4000 Series is a basic proposition in terms of solutions to exterior doors aluplast. Thanks to the multi-chamber construction with a depth of 70 mm and the use of the threshold of the door with a heat-insulating liner, have very good thermal insulation parameters. The use of steel reinforcements for large cross-sections and the use of weldable corner connectors ensure the appropriate parameters and static strength.
As part of the system solution available is the low threshold of the door with a height of 20 mm, which corresponds to the requirements for building devoid of architectural barriers and allows trouble-free entry and exit.
Strong entrance.
Six-chamber system with a depth of 85 mm with the possibility of using fillings to 51 mm width.
IDEAL 7000 Series opens up new possibilities in the production of exterior doors. Thanks to the multi-chamber construction, installation depth of 85 mm and the possibility of using glazing and fillings with a width of 50 mm was able to significantly improve the performance of thermal insulation construction, reaching a value of Uf to 1.2 W / m2K.
As part of the system solution available is the low threshold of the door with a height of 20 mm, which corresponds to the requirements for building devoid of architectural barriers and allows trouble-free entry and exit. Specially shaped foot threshold allow you to connect to the system with additional profiles, such as enlargement. Wide aluminum drip cap effectively drains the water out.
In a series of Ideal 7000 it has a new system solution for exclusive door with a sleek and simple design we have. With the new profile drzwiowemu, dedicated to exterior doors with fillings nakładkowymi zakrywającymi plane wings, doors Aluplast meet the high aesthetic requirements of architects. The new solution for exterior doors have been developed in consultation with all the leading manufacturers of fillings. The result: with reduced to 4 mm to 81 mm installation depth of the new variant of the wings, all popular filling can be no replacement of gaskets used for system installation depth profiles of 85 mm.