General Information, door profile steel, are designed for use in private buildings, industrial and public buildings. Doors general use is one or double hinged doors, rebate. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, doors, steel profile, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate.

General, Doors Steel Profile for transformer stations are designed for use in buildings and areas that require constant air exchange. Steel doors profile is a single or double hinged doors, rebate. They consist of wings fully, partially equipped with louvers for ventilation, or entirely filled with blind for ventilation and a steel frame with a threshold or not.

For details, doors, steel profile, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate.

Metalpol - Polish manufacturer of steel doors introduced a new surface finish of its products: stamping. However, unlike in the market of steel doors of various manufacturers as only does the individual - any patterns pressings depending on customers' needs.

Modern technology shaping sheet allows you to create individual projects in difficult processing material with high precision. Bilaterally applied galvanized sheet thickness of 1.5 mm makes the product is not only durable, but also visually attractive, and may be unique.

Steel doors stamped are designed for customers requiring both high quality as well as excellent thermal insulation and aesthetic performance.

General, steel sliding doors can be used as internal or, in some cases as external separation in industrial buildings. They can be made as a single, double, sliding or sliding. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, doors single or double. Wing door, single or double system is made of steel profiles, filling constitute galvanized steel, powder coated in any color. As the warming of the foam of polyurethane. Door frames are made of steel with a galvanized steel sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in a rail at least two adjustable rollers one. Limiters prevent sliding wings with the guide rail.

General, Steel doors general purpose, are intended for use in private buildings, industrial and public buildings. Doors general use is one or double hinged doors, rebate. They consist of full leaf or partially glazed and with a steel frame, with or without a threshold

For details, Doors general purpose, single or double. Wing door, single or double, full or glass is made of two steel sheets 1.5 mm thick galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate

General, Steel doors swing, are intended for use in industrial and commercial buildings. Doors general use is one or double doors rebated. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, Steel doors swing, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Door frames are made of steel, galvanized with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame by means of closer underfloor lockable in the open position at an opening angle of 90 °.

General, Steel doors for installation shafts, are designed for use in private buildings, industrial and public buildings. The door to the shafts are single or double hinged doors, rebate. They consist of full leaf and a steel frame.

For details, doors to the shafts, single or double, full is made of a steel sheet thickness of 1 mm, galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of angle iron 40x40x4mm. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges.

Metalpol Furmaniak introduces the standard steel door ECO. Despite the economic name of the product is made of two sheets of 1.0 and 1.5 mm, with angular frame sheet 2 mm.

Steel doors ECO to exterior doors in standard dimensions 900/2000 mm. The high thermal insulation Ud = 1.3 W / m2K, obtained through the innovative separation of metal sheathing.

The inner filling consists of mineral wool with a high density. According to the adopted in METALPOL standard basic equipment is a mortise lock in accordance with PN-EN 12209 tested at 200 thousand. cycles.

General Information, door profile steel, are designed for use in private buildings, industrial and public buildings. Steel doors profile is a standard single or double hinged doors, rebate. They consist of full leaf or partially glazed and a steel frame with a threshold or not.

For details, doors, steel profile, single or double. Wing door, single or double, full or glass is made from cold rolled steel profiles with wall thickness of 2 mm galvanized and powder coated. Wing passive in the double doors is blocked by lock edge. Door frames are made of steel, profiled galvanized sheet with a thickness of 2.0 mm and powder coated. Racks frames are welded. Door wings are suspended in the frame for a minimum of two hinges. No perimeter of the frame and sash is set gasket rebate.